1. There are some operations to adjust the color and dot size, so that after recording it, other designers can easily get started if they take over his work.

2. The responsible person should mark the detailed information on the edge of the film, such as its name, exposure method, etc. This reduces the chance that the film will be misprinted.

3. The various parameters in the printing process must be statistically included and included in the table, such as temperature, drying time, etc., plus what method is used.

4. When the relevant personnel have prepared the basic content of printing required by the customer, it is necessary to let the customer confirm in an effective form that the design is correct. Otherwise, if the customer does not meet their own requirements, the relevant personnel will bear full responsibility.